Recent site activity

Oct 26, 2018, 7:24 AM Paul Hardin edited Laser Settings 80W
Oct 26, 2018, 7:17 AM Paul Hardin edited Laser Settings 80W
Oct 26, 2018, 7:16 AM Paul Hardin edited Laser Settings 80W
Oct 26, 2018, 7:14 AM Paul Hardin edited Laser Settings 80W
Oct 26, 2018, 7:13 AM Paul Hardin edited Laser Settings 80W
Oct 15, 2018, 7:42 AM Paul Hardin edited I. Slicing with Cura
Oct 15, 2018, 7:41 AM Paul Hardin attached MakeItlabs_PRUSA_0.2mm.curaprofile to I. Slicing with Cura
Oct 15, 2018, 7:28 AM Paul Hardin edited I. Slicing with Cura
Oct 13, 2018, 8:30 PM Paul Hardin edited I. Slicing with Cura
Oct 13, 2018, 8:27 PM Paul Hardin edited I. Slicing with Cura
Oct 13, 2018, 8:26 PM Paul Hardin created H. Slicing with Cura
Oct 13, 2018, 3:09 PM Paul Hardin edited B. Filament Handling
Oct 13, 2018, 3:05 PM Paul Hardin edited 8. Post Work
Oct 13, 2018, 1:45 PM Paul Hardin edited 8. Post Work
Oct 13, 2018, 1:39 PM Paul Hardin created 8. Post Work
Oct 13, 2018, 1:38 PM Paul Hardin edited 7. Done?
Oct 13, 2018, 1:35 PM Paul Hardin edited 6. It's printing
Oct 13, 2018, 1:31 PM Paul Hardin edited 5. Printer Setup
Oct 13, 2018, 10:01 AM Paul Hardin edited 5. Printer Setup
Oct 13, 2018, 9:58 AM Paul Hardin attached Rep2_SD.jpg to 5. Printer Setup
Oct 13, 2018, 9:53 AM Paul Hardin edited 5. Printer Setup
Oct 13, 2018, 9:48 AM Paul Hardin edited 4. CAM Slicing with MakerBot Print
Oct 13, 2018, 9:34 AM Paul Hardin edited 4. CAM Slicing with MakerBot Print
Oct 13, 2018, 9:34 AM Paul Hardin edited 4. CAM Slicing
Oct 13, 2018, 9:27 AM Paul Hardin attached makerbot menu Place.png to 4. CAM Slicing

older | newer