Resources‎ > ‎

3D Printers


Contacts:
    Slack: #space-3dprinting
    Email: 3dprinting@makeitlabs.com
    Resource Managers:
        Bill Schongar (3D Touch, ZCorp), John Spitz (3D Touch), Paul Hardin (Makerbot)
        
Available printers

  • This is a "General Use" space-owned 3D printer
  • It prints in both ABS and PLA, has two extruders, and uses 3mm filament
  • Training is provided by the Resource Managers
    • John Spitz (John.Spitz@makeitlabs.com)
    • Bill Schongar (Bill.Schongar@makeitlabs.com)

  • This is a member-owned resource, and with proper training can be used with permission.
  • It prints in PLA, has a single extruder and uses 1.75mm filament
  • Please see this printer's Resources link for lots of details on this printer
  • Training is provided by the owner (Paul.Hardin@makeitlabs.com)
Zprinter 450
  • This is a "General Use" space-owned 3D printer
  • It prints in full color using a powder and binding agent
  • There are fees associated with printing on this printer
  • Training is provided by the Resource Manager

Getting started
  1. Contact the resource manager(s) for the Printer(s) you'd like to use
  2. Attend a training class
  3. Print

Common Questions

1) How long does training take?

The Basic Training for the 3D Touch printer takes less than 30 minutes. At this point you'll be able to print most items which do not have any special considerations.

2) What do you mean "special considerations"?

There's a long list, and you'll learn in the class. In general it means:
  • You won't be qualified to change the filament (you're stuck with whatever colors and types are loaded)
  • You won't be well-versed in how to fix a "broken" 3d model you download off the internet
  • Changes to certain machine settings, such as material temperature, must be made by a resource manager
3) What does it cost to print something?

For the extrusion based printers, nothing, but if you're using a lot of filament you should donate to the space to help cover filament costs so we don't run out. Remember that many other spaces charge by the hour or the gram; we don't want to have to do that.

For the Zprinter 450, cost is based on amount of material used, and you will be invoiced after your print.  Pricing can be found here

As a cost guideline, during training you'll see how the software automatically calculates both the build time and the materials cost. This can be used to give you an idea of how much your print is costing the space.

4) How long does it take to print something?

It's not quick. Large prints can take hours. So don't use the 3D printer to make something that could easily be cut on the Laser... it's not an efficient use of your time. Build time estimates are provided by the software, as you'll see in class, so you'll know ahead of time how long it will take.

5) Do I have to reserve the printer?

There is currently no reservation system for the 3D Touch printer. If you have a specific need or availability, contact the resource managers and something may be possible.

6) Can I print multiple colors or materials?

The 3D Touch is a dual-extruder model, and can print two different materials (or different colors of the same material). If you have not taken Advanced training for the 3D Touch, you are not authorized to change the filament or filament settings; Contact a resource manager for help.

The Zprinter 450 prints in full color, but only one material (plaster).

7) I want to print in (odd color here) - Do we have that?

Assume the answer is "no". No special consideration for material color is available unless material has been donated, so if you have a specific need your best bet is to contact the Resource Managers and discuss the need. They will then help you find compatible material that you can purchase and use on the printer, with the help of a qualified individual to change the filament and settings.

8) I want to print in (random filament type I read about on the interwebz). Can I do that?

Contact the resource manager(s). If it's compatible and you supply the material, it may be possible... but don't buy any special filament before talking to the resource manager(s)!

9) Do I need to be physically in the space when printing?

Yes, or have someone watching the print for you. It does not need to be watched closely - just check at reasonable intervals to make sure nothing's going wrong. That way if something is wrong you can stop the job before either filament is wasted or the printer is damaged.

The Zprinter 450 can be run unattended at your own risk.  You will still be charged for failed prints, unless the failure is due to an equipment issue (ex: machine breaks down mid print).








Ċ
Bill Schongar,
Dec 9, 2016, 7:34 AM
Comments