Resource Areas‎ > ‎Laser Cutters‎ > ‎

Laser, Full Spectrum

All the stuff the applies to all lasers

No looking at the lasers, you'll put your eye out kid
No huffin' the fumes.. make sure the fan is on.
The chiller (water in a 5 gal bucket with a pump) keeps the laser from doing bad things, make sure it is working.
Fire = E-stop button, Burn =  bad, Vaporize = good

The Laser Cutter/Engraver is a full spectrum H series
Basic specs are:
  • Laser power: 40W
  • Working area: 20” x 12” (508 mm x 304.8 mm)
  • fixed Worktable with about ??? inches (???cm) of usable height
  • Location precision: less than 0.0??mm
  • Highest scanning precision: ????DPI
  • Compatible software: CorelDraw, AutoCAD, Photoshop 


  • Brad Goodman is the resource manager and can be reached at
  • Check out the #space-laser channel on Slack for real-time conversation


Official training is mandatory before you will be allowed to use the laser. For course offerings CLICK HERE
Online training will be available soon - and can will taken by watching THIS VIDEO.

Documentation and Downloads

The following manuals will give you a better idea about operation of the machine and software.

Official training is MANDATORY before you will be allowed to use the machine.

Download Instruction Manual

Go to "downloads" and look for "Legacy RetinaEngrave 3D (RE v1.0)"

Download Software Manual

Product Page

to install the print driver use these
user = retinaengrave1*notthis*
pass = softwaredownload*notthiseither*