No looking at the lasers, you'll put your eye out kid
No huffin' the fumes.. make sure the fan is on.
The chiller (water in a 5 gal bucket with a pump) keeps the laser from doing bad things, make sure it is working.
Fire = E-stop button, Burn = bad, Vaporize = good
The Laser Cutter/Engraver is a full spectrum H seriesBasic specs are:
Official training is mandatory before you will be allowed to use the laser. Classes are generally held monthly. Information and registration for classes, not yet avaliblible.
The mechanical manual
The following manuals will give you a better idea about operation of the machine and software.
Official training is MANDATORY before you will be allowed to use the machine.
The software manual
to install the print driver use these
user = retinaengrave1*notthis*
pass = softwaredownload*notthiseither*