Cuts Aluminum, Steel and others metals up to 24"x24"
Training required
UV Laser Training (Self-Authorized) is a good prerequisite
Runs same super easy xTool Studio software as UV laser. (Free download)
More info coming soon!
Air Dryer - On floor to left of machine - Red switch on top
Badge-In - RATT in with key fob on desk
Air Compressor - On floor - Opposite side of room - Red button turns on/off - "Pressure Setting" will show number when on, dashes when off
Gantry - Main unit - Red toggle switch on front - Twist E-Stop if it is depressed
Laser Source - On floor to right of main unit. Toggle switch in back. Press the green "acknowledge" button on-screen after starup
WARNING - EXTREME TEMPERATURES!!
No, not "hot stove" temperatures, more like glass melting temperatures!! Use extreme caution when:
Handling Materials which have been lased
Opening bottom drawer, sifting through sand or touching materials at the bottom of the bed
When in doubt - use IR Thermometer to get a rough idea
NEVER ATTEMPT TO USE LASER HEAD WHEN REMOVED FROM GANTRY!
Doing so without explicit permission WILL result in revocation of laser privileges, and may result in termination of membership.
Removal of head should ONLY EVER be done to switch nozzels - which is not even an allowed process at this time.
Limit material thickness to 1/8" for the time being.
Capabilities for thicker materials may be added over time - these will need to include concideations such as:
Better, more validated material settings
Different nozzles
Click on PLUS on top toolbar to open a new design/tab
Import a file with the "plus" tool in the deisgn workspace
Other text or drawing tools can be used to create basic shapes
AI and application icons can help assist in projects
Selecting an object will allow you to modify, merge, resize, dimension and edit shapes
Only use 2mm nozzel. Use material settings for 2mm nozzle
We only have compressed air. Select "Air" or "Compressor" in material settings
Not all materials in library have parameters for our nozzle and air-type. Try a different one - or adjust settings manually. If you are cutting - make sure you have selected CUT!
Focus head to recommendations - which SHOULD roughly be material thickness. Maybe. We don't know.
(Note: Set to NEGATIVE values - in mm)
So you couldn't find the settings you needed, and need to try adjusting yourself? Here are some rules of thumb:
Thin stuff - 1mm-2mm 100% Power 200 or even 300 mm/Sec - very fast!
Medium stuff - 1/8" 100% Power 140 mm/Sec
Thick Stuff - 1/4" 100% Power a Few mm/Sec - Requires special perforation settings - don't try yet!
GOOD SIGN: Sparks come out from BOTTOM of material during cut
NEUTRAL: Can't see any cuts in piece! (Sometimes the kerf is SO SMALL - you just can't see it!)
WARNING SIGN: Orange glowing blob in sand at bottom of laser bed during cuts - May be cutting too slowly!
No Second passes! If it doesn't perforate and cut on FIRST PASS - it's not working correctly. Incomplete first passes result in slag getting pushed up to the top of your workpiece, and causing nozzel fouling and head collisions. If it doesn't penetrate on first pass - it's not working!