Frame Welding Jig

Steve A and Brian M had an idea to build a frame welding jig to build custom bikes.  After some research, Rob R provided a link to a great instructable page on just that.  So far we have a few segments of 8020 and some brackets, but we are looking to move this process along as soon as we can.  There are a few tools that will be needed for this project, as listed below.

• • A tubing notcher

  • A tubing bender / roller

  • Custom mounting brackets for bottom bracket, rear drop-outs, and head / seat tube.

  • 8020 hardware

This project has a lot of potential, and though it is in early formative stages, we have a good idea of what the end result will be.  We have the link to the instructable below for reference.

http://www.instructables.com/id/The-simplest-bicycle-framebuilding-jig-I-could-com/