Laser, Full Spectrum
All the stuff the applies to all lasers
No looking at the lasers, you'll put your eye out kid
No huffin' the fumes.. make sure the fan is on.
The chiller (water in a 5 gal bucket with a pump) keeps the laser from doing bad things, make sure it is working.
Fire = E-stop button, Burn = bad, Vaporize = good
The Laser Cutter/Engraver is a full spectrum H series
Basic specs are:
Laser power: 40W
Working area: 20” x 12” (508 mm x 304.8 mm)
fixed Worktable with about ??? inches (???cm) of usable height
Location precision: less than 0.0??mm
Highest scanning precision: ????DPI
Compatible software: CorelDraw, AutoCAD, Photoshop
Brad Goodman is the resource manager and can be reached at email@example.com
Check out the #space-laser channel on Slack for real-time conversation
Official training is mandatory before you will be allowed to use the laser. For course offerings CLICK HERE
Online training will be available soon - and can will taken by watching THIS VIDEO.
Documentation and Downloads
The following manuals will give you a better idea about operation of the machine and software.
Official training is MANDATORY before you will be allowed to use the machine.
Download Instruction Manual
Download RetnaEngrave Software (Windows)
Go to "downloads" and look for "Legacy RetinaEngrave 3D (RE v1.0)"
Download Software Manual
View the Full Spectrum Training Class Outline
to install the print driver use these
user = retinaengrave1*notthis*
pass = softwaredownload*notthiseither*